Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Changing Network speeds to Full/100

Can someone please explain to me step by step on changing the network speed to full/100. everytime I do it, it seems to change back to auto.

4 REPLIES

Re: Changing Network speeds to Full/100

Hi Robert, Is that Cisco IOS/CatIOS or any Operating System? Thanks Goutam.

Hall of Fame Super Blue

Re: Changing Network speeds to Full/100

Robert

IOS

switch(config)# int fa0/5

switch(config-if)# speed 100

switch(config-if)# duplex full

switch# wr mem

CatOS

switch# set port speed 100

switch# set port duplex full

Note that the port will go down and then up when you change the settings.

HTH

Jon

New Member

Re: Changing Network speeds to Full/100

Thank you. I am not sure whats going on then. Somehow my speed keeps resetting it's self to auto. I will try again, but thats trhe same commands I am using.

Re: Changing Network speeds to Full/100

Do you have SNMP management with RW access on the switch by any chance?

Kevin Dorrell

Luxembourg

147
Views
0
Helpful
4
Replies