Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Changing of IP address and domain

Dear,

We had before been connected to a host with below config;

HOSTS LIST OLD

--------------

151.193.141.1 LB1.DCS.*.*

Our old sol: we were adding the HOSTS file at the workstation like below;

57.234.224.1 ( private IPs) LB!.DCS.*.*

AND we were doing NATing on the router like below;

57.234.224.1 151.193.141.1

NOW the host has changed its domain and IP address as below:

HOSTS LIST NEW

--------------

151.193.141.39 LB1.*.*

NOW THE QUESTION IS: how to do the above changes with minimum changes from our side in workstations/and or in router ?

Thanks

1 REPLY
Silver

Re: Changing of IP address and domain

You may have to change the HOSTS file in the workstation with the new domain and ip address and also modify the nat configuration in the router with the new ip address(151.193.141.39) for translation.

229
Views
0
Helpful
1
Replies
CreatePlease to create content