Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

changing static nat on asa

Hi i need to change static association for a public ip to internal ip

right now i have following statment.

static (dmz,outside) 66.xx.xx.xx 192.168.50.91 netmask 255.255.255.255

it needs to be changed to

static (dmz,outside) 66.xx.xx.xx

192.168.51.14 netmask 255.255.255.255

what should I need to do ?

do i need to add no statment to previous statement and execute new ?

1 REPLY
Hall of Fame Super Blue

Re: changing static nat on asa

Hi

yes you should do

no static (dmz,outside) 66.xx.xx.xx 192.168.50.91 netmask 255.255.255.255

then

static (dmz,outside) 66.xx.xx.xx

192.168.51.14 netmask 255.255.255.255

You will then need to clear the xlate. Do not just enter "clear xlate" as it will remove all the xlates which will break all existing connections through the ASA.

Do

clear xlate global 66.xx.xx.xx

HTH

Jon

112
Views
0
Helpful
1
Replies
CreatePlease to create content