channalized Wan card(E1)

[Jayesh Prajapati]

hi,

Is it possible to Channilized WIC 1T Serail Interface into 30 64 Kbps of channilized interface or subinterfce or any how is it possible?

[paolo bevilacqua · Accepted solution]

No, it is not possible.

You need specific hardware for channelized service, that depends on the router you have.

[Wilson Samuel]

Hi Jayesh,

Just one more thing, these days we have VWIC E-1/T-1 cards, so if you are talking about any of that card, then yes, its possible. However to be absolutely sure, we will need the part number, that you may get from sh ver.

If you could paste that, then we can tell you absolutely if its possible or not.

HTH

Regards

Wilson Samuel

[paolo bevilacqua]

VWIC are not a good idea for channelized, because only 2 channel groups are supported.

The current product for channelized on ISR router are explained here:

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/product_data_sheet0900aecd80710c88.html

[Wilson Samuel]

Wow, thanks for the update. Seems that in the last few months things have changed pretty dramatically.

So, Channelized PRI, means one can have a lot of Channel Groups configured for different things, correct?

Regards

[paolo bevilacqua]

Yes, it's some TDM technology still found in developing countries.