Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Channelizing DS3s - Channel-Group question

Hey all.

I am configuring a 7204 with two DS3 circuits that are being channelized into 28 T1s each. I want to make sure I have them configured correctly before I start turning up circuits.

I have done research but connot find anything for multiple DS3s and creating multiple channel groups on one router.

Correct me if I am wrong but can I just create two channel-groups, one for each card. I know T1s have 24 timeslots. Should this work?

Again I have little experience configuring these circuits. I am going by my research.

controller T3 1/0

framing m23

cablelength 450

t1 1 channel-group 0 timeslots 1-24

t1 2 channel-group 0 timeslots 1-24

t1 3 channel-group 0 timeslots 1-24

t1 4 channel-group 0 timeslots 1-24

t1 6 channel-group 0 timeslots 1-24

t1 7 channel-group 0 timeslots 1-24

t1 8 channel-group 0 timeslots 1-24

t1 9 channel-group 0 timeslots 1-24

t1 10 channel-group 0 timeslots 1-24

t1 11 channel-group 0 timeslots 1-24

t1 12 channel-group 0 timeslots 1-24

t1 13 channel-group 0 timeslots 1-24

t1 14 channel-group 0 timeslots 1-24

t1 15 channel-group 0 timeslots 1-24

t1 17 channel-group 0 timeslots 1-24

t1 18 channel-group 0 timeslots 1-24

t1 19 channel-group 0 timeslots 1-24

t1 20 channel-group 0 timeslots 1-24

t1 21 channel-group 0 timeslots 1-24

t1 22 channel-group 0 timeslots 1-24

t1 23 channel-group 0 timeslots 1-24

t1 24 channel-group 0 timeslots 1-24

t1 25 channel-group 0 timeslots 1-24

t1 26 channel-group 0 timeslots 1-24

t1 27 channel-group 0 timeslots 1-24

t1 28 channel-group 0 timeslots 1-24

controller T3 2/0

framing m23

cablelength 450

t1 1 channel-group 1 timeslots 1-24

t1 2 channel-group 1 timeslots 1-24

t1 3 channel-group 1 timeslots 1-24

t1 4 channel-group 1 timeslots 1-24

t1 6 channel-group 1 timeslots 1-24

t1 7 channel-group 1 timeslots 1-24

t1 8 channel-group 1 timeslots 1-24

t1 9 channel-group 1 timeslots 1-24

t1 10 channel-group 1 timeslots 1-24

t1 11 channel-group 1 timeslots 1-24

t1 12 channel-group 1 timeslots 1-24

t1 13 channel-group 1 timeslots 1-24

t1 14 channel-group 1 timeslots 1-24

t1 15 channel-group 1 timeslots 1-24

t1 17 channel-group 1 timeslots 1-24

t1 18 channel-group 1 timeslots 1-24

t1 19 channel-group 1 timeslots 1-24

t1 20 channel-group 1 timeslots 1-24

t1 21 channel-group 1 timeslots 1-24

t1 22 channel-group 1 timeslots 1-24

t1 23 channel-group 1 timeslots 1-24

t1 24 channel-group 1 timeslots 1-24

t1 25 channel-group 1 timeslots 1-24

t1 26 channel-group 1 timeslots 1-24

t1 27 channel-group 1 timeslots 1-24

t1 28 channel-group 1 timeslots 1-24

Thanks for your help!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Channelizing DS3s - Channel-Group question

Yes. You can reuse channel-group 0 for both, because the interface ID will discriminate anyway.

3 REPLIES
Hall of Fame Super Gold

Re: Channelizing DS3s - Channel-Group question

Yes. You can reuse channel-group 0 for both, because the interface ID will discriminate anyway.

New Member

Re: Channelizing DS3s - Channel-Group question

Cool.

Thanks a bunch!

Hall of Fame Super Gold

Re: Channelizing DS3s - Channel-Group question

No problem. Thank you for the nice rating and good luck!

570
Views
0
Helpful
3
Replies
CreatePlease to create content