Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Chat-script config

Hi all,

I am trying to configure 1841 router with WIC-1T card and external CDMA modem.

I have configured line tty interface for autodiscovery. Is it mandatory to configure chat-script?. I donot know the chat script details of the modem. How to go with?

Thanks in advance

RBK

4 REPLIES
Silver

Re: Chat-script config

Yes, I believe you do need a chat-script to initialize the modem. Here is a URL for configuring the 3200 with external modems. I think it would work similarly with the 1841. At the end of this document there are chat scripts for the most popular modems and carriers. You may want to check with your carrier to ensure the accuracy. HTH

http://www.cisco.com/en/US/docs/routers/access/3200/software/configuration/guide/M517modm.html

Hall of Fame Super Gold

Re: Chat-script config

Has the modem an asynch interface? If so, you cannot use it with WIC-1T.

New Member

Re: Chat-script config

Hi,

Yes, I am using WIC-1T & CDMA Modem is Async. But as per document, WIC-1T works in both Async & Sync mode when used with 1700 Routers. I hope this is same for 1841 also.

http://www.cisco.com/en/US/products/hw/modules/ps3129/products_tech_note09186a00800b0859.shtml

I hope this support for both Async & Sync is applicable for 1841 Routers also

Please let me know if I am deviating any where.

Hall of Fame Super Gold

Re: Chat-script config

Not sure, Cisco often "forgets" to carry features from one platform to another.

Perhaps the AUX port would work.

171
Views
10
Helpful
4
Replies
CreatePlease to create content