CICSO WS-X6582-2PA and CISCO SPA-2XT3/E3 compatability issue
We purchased a WS-X6582-2PA Enahanced Flex WAN Module and a SPA-2XT3/E3 Shared port adapter. We now find that the SPA-2XT3/E3 does not fit in the WAN Module. Is there a module adapter that will allow the use of the SPA-2ST3/E3 with the WS-X6582-2PA. If not, the data sheet for the Wan Module states that it supports a SPA ATM but I can not find a model number - any help?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...