Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cir, Bc and Tc calculations

if Cir = 768K

Bc = 2000

Be = 7680

what will be Tc?

2 REPLIES
Cisco Employee

Re: Cir, Bc and Tc calculations

Hi Mohinder,

The minimum Tc value is 10 ms. So if your CIR is 768K, you cannot configure Bc of value less than 7680. If you still configure a value lesser than 7680, you will end up with Tc = 10ms and Bc = 7680.

HTH,

Nagendra

Re: Cir, Bc and Tc calculations

Tc is the interval during which you send the Bc bits in order to maintain the average rate of the CIR in seconds.

Tc = Bc/CIR in seconds

The range for Tc is between 10 ms and 125 ms. The router internally calculates this value based on the CIR and Bc values in the map class. If Bc/CIR is more than or equal to 125 msec, it uses the internal Tc value. If Bc/CIR is less than 125 ms, it uses the Tc calculated from that equation.

hope that clarifies.

pls rate all helpful posts.

934
Views
0
Helpful
2
Replies