Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 1760 router problem

Hi,

Any idea why I can not remove the deleted file in flash: ?

R1#show flash:

System flash directory:

File Length Name/status

1 12124968 c1700-ipvoice-mz.123-5d.bin [deleted]

2 12504136 c1700-ipvoice-mz.123-15a.bin

[24629232 bytes used, 8925196 available, 33554428 total]

32768K bytes of processor board System flash (Read/Write)

R1#squeeze flash: ?

<cr>

R1#squeeze flash:

Squeeze operation may take a while. Continue? [confirm]

First create squeeze log by erasing the entire device

%Error squeezing flash (Missing or corrupted log)

R1#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C1700 Software (C1700-IPVOICE-M), Version 12.3(15a), RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Thu 21-Jul-05 23:43 by dchih

Image text-base: 0x8000816C, data-base: 0x81434990

ROM: System Bootstrap, Version 12.2(4r)XL, RELEASE SOFTWARE (fc1)

ROM: C1700 Software (C1700-IPVOICE-M), Version 12.3(15a), RELEASE SOFTWARE (fc2)

R1 uptime is 3 weeks, 1 day, 14 hours, 46 minutes

System returned to ROM by power-on

System restarted at 19:28:37 NZDT Tue Feb 13 2007

System image file is "flash:c1700-ipvoice-mz.123-15a.bin"

cisco 1760 (MPC860P) processor (revision 0x200) with 59097K/6439K bytes of memory.

Processor board ID FOC06370050 (2079331927), with hardware revision BB67

MPC860P processor: part number 5, mask 2

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

Primary Rate ISDN software, Version 1.1.

1 Ethernet/IEEE 802.3 interface(s)

1 FastEthernet/IEEE 802.3 interface(s)

13 Serial network interface(s)

1 Channelized E1/PRI port(s)

32K bytes of non-volatile configuration memory.

32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

R1#

1 REPLY
Hall of Fame Super Silver

Re: Cisco 1760 router problem

The squeeze operation writes to a log recording what it is doing. For some reason that log is not functioning on this router. I am pretty sure that if you erase flash (as the error message indicates) it will correct the problem and re-create the log.

HTH

Rick

421
Views
0
Helpful
1
Replies