i have a problem with a cisco 1802 router.When i connect the router to the ADSL line, the CD led is green but the router cant authenticate with the ISP.The ADSL line is 4532/768 Kbits. When i connect the router to a 1024/256 ADSL line (with the same configuration) the router connects with the ISP and the PPP led is green. The IOS ver is the c180x-adventerprisek9-mz.124-15.T1. The only i can think, is that when i see the dsl stats, the capacity usage for the uplink is at 100%.
The line is ok, because when i connect a very cheap router (ADSLoISDN)to the line it connects without any problem. The cisco cant obtain an IP, the Virtual Access protocol is down. I think is a problem with the compatibility with the local DSLAM or the router cant play with 4Mbit ADSL line (NOT ADSL2 or ADSL2+ line. Any ideas?
The router with the exact same configuration works fine with an ADSL line (ANNEX B) at 1024/256 speed. The VPI/VCI are ok (8/35).I have send e-mail to the ISP and i 'm waiting for an answer.I think that the problem is the upload of the line(768).You can not buy from the provider a line at 4096/768,but a line at 4096/256 (readind the offers at the providers web page). Also the main telphone company in Greece (OTE) changes the DSLAMs to SIEMENS ones. It's very strange problem. The next time i will visit my customer i will have with me a cisco 876 to test again the line. Thank you very much! I will post the solution (if its possible) of the problem.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.