We currently have a HS Internet connection w/static IP address coming into our office & plugging into a Cisco PIX 501. We want to get another HS Internet DSL connection from different carrier for redundancy.
1) Literature on the 1811 indicates that it can do load balancing as well as redundancy. Is this correct and I would be able "load balance" my traffic to make most efficient use of both connections, as well as having the fail over capability should one of the connections go down?
2) Is the security features on the 1811 similar to and equally as restrictive as my PIX 501, so that I can remove the PIX 501 from my office and move it to a new second location that we will be opening within 60 days? Or for best security does the PIX 501 need to stay in place behind the 1811 router?
3) If I move the PIX 501 to second location, I should be able to VPN between the PIX and the 1811 at the HQ correct?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...