Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 1811 setup multiple WAN subnets

Our internet provider gave us two WAN ip subnets. Our Cisco 1811 connected through PPPOe to receive the first subnet and get the Gateway IP.

We cannot get the second subnet to work. It seems that somewhere in the configuration a change has to be made to let the 1811 now that it should also route this subnet.

Does anyone now how to get this working?

Thanks a lot!

AV

1 REPLY
Hall of Fame Super Blue

Re: Cisco 1811 setup multiple WAN subnets

arjen9999 wrote:

Our internet provider gave us two WAN ip subnets. Our Cisco 1811 connected through PPPOe to receive the first subnet and get the Gateway IP.

We cannot get the second subnet to work. It seems that somewhere in the configuration a change has to be made to let the 1811 now that it should also route this subnet.

Does anyone now how to get this working?

Thanks a lot!

AV

Are you actually assigning these IPs to devices or do you just want to use them for natting inside devices to those WAN IPs.

If the first then look at secondary addressing on the WAN interface. If the second then simply apply NAT statements to your router.

Jon

405
Views
0
Helpful
1
Replies
CreatePlease login to create content