11-26-2008 03:58 PM - edited 03-04-2019 12:30 AM
I've been trying to set up a cisco 1812. I've used the SDM Express programm to set things up at first, but haven't been able to get internet access.
I can't determine what I missed, so any help would be much appreciated.
I have attached the config file as SDM exports it.
Solved! Go to Solution.
11-26-2008 04:46 PM
Robert,
The actual DNS of the ISP should suffice because NAT is in place.
HTH
Lejoe
11-26-2008 04:20 PM
Robert,
Assuming you can ping your default gateway 192.168.1.3
One thing I see that is missing is the dns-server address in the dhcp configuration. I would presume you are not able to connect to the internet [ as in browse] because you are unable to resolve host names.
HTH
Lejoe
11-26-2008 04:33 PM
Lejoe,
Yes I can ping my default Gateway and log in, so that works.
The Wan gets the IP address automatically from the modem, but not the DNS? So what do I put in? The actual DNS of my ISP, or the IP of the modem, as is usual with other routers?
Thanks,
Robert
11-26-2008 04:46 PM
Robert,
The actual DNS of the ISP should suffice because NAT is in place.
HTH
Lejoe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: