I'm no expert in Cisco, but I wanted to get a simple config up and running so I can test a new connection that was just installed. Basicaly this router will connect one of the ethernet interface to the NTU and the other will just connect to a laptop so I can test the upload and download speeds of the new connection..
I have setup the router with what I hope is somewhat correct and also applied the 9.3Mb shapping policy that the ISP told me to. Now my problem is that once everything is hooked up I still cant access any the net, I believe that its has something to do with the routin. Also is it normal that when setting up the interfaces it doesn't ask for the Gateway IP??
Heres the running config
Current configuration : 1060 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname router ! boot-start-marker boot-end-marker ! no logging buffered enable secret 5 $1$nPs.$B5pZUjaXaQPJ13d9RMi8T/ enable password xxxx ! no aaa new-model no ip routing no ip cef ! ! ! ! ip name-server 188.8.131.52 ip name-server 184.108.40.206 multilink bundle-name authenticated ! ! archive log config hidekeys ! ! ! policy-map shape-all class class-default shape average 9300000 ! ! ! ! interface FastEthernet0/0 description $ETH-LAN$ ip address 10.10.10.1 255.255.255.0 no ip route-cache speed auto full-duplex no mop enabled ! interface FastEthernet0/1 description $ETH-LAN$ ip address 120.xxx.xxx.10 255.255.255.252 no ip route-cache duplex auto speed auto service-policy output shape-all ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 120.xxx.xxx.9 permanent (This is the GW IP that the ISP gave me not sure if this route is correct) ! ! ip http server ! ! ! control-plane ! ! line con 0 line aux 0 line vty 0 4 password xxxxxx login ! scheduler allocate 20000 1000 end
As I said this is just a basic setup to get some quick testing done, I will get this setup by a professional once I'm happy that the connection is providing what its ment to
We are pleased to announce availability of Beta software for 16.6.3. 16.6.3 will be the second rebuild on the 16.6 release train targeted towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are looking for early feedback from custome...