Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cisco 1841 with no service password-recovery

I use c1841 with IOS adventerprisek9-mz.124-15.T2.bin and try to configure with "no service password-recovery" command but I see only "no service password-encryption" command on the router.    

I also check with Cisco Feature Navigator and there is service password-recovery feature support with this IOS that I mention.

I don' t know why I can not see this "no service password-recovery" command on my router.   

Could you please help me and advice.

Thank you in advance

Regards,

porramed

  • WAN Routing and Switching
2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

it is a ROMMON security

it is a ROMMON security mechanism and highly depend on your ROMMON Version.

New Member

Change your ROMMON to Version

Change your ROMMON to Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

6 REPLIES

Hi,what about your ROMMON

Hi,

what about your ROMMON version?

See "You must download and install ROM monitor (ROMMON) version 12.2(11)YV1 before you can use this feature." here:

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_cfg/configuration/15-sy/sec-usr-cfg-15-sy-book/sec-no-svc-pw-recvry.html#GUID-5C387826-455E-41E4-88C2-F6D6412FA9BA

 

Best regards,

Milan

 

 

New Member

Hi Here is my router 1841

Hi 

Here is my router 1841 information.   I see that ROM is version 12.3(8r)T9 as following.  Do I need to change the ROM version?

 

 

Router#sh ver                          

Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 12.4(11)T2, RELEASE SOFTWARE (fc4)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 30-Apr-07 15:12 by prod_rel_team
 
ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)
 
Router uptime is 4 minutes
System returned to ROM by reload at 02:31:33 UTC Tue May 27 2014
System image file is "flash:c1841-adventerprisek9-mz.124-11.T2.bin"
 
 
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
 
A summary of U.S. laws governing Cisco cryptographic products may be found at:
 
If you require further assistance please contact us by sending email to
 
Cisco 1841 (revision 6.0) with 248832K/13312K bytes of memory.
Processor board ID FHK101520WF
2 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
 
Configuration register is 0x2102
 
Router#

 

 

New Member

Change your ROMMON to Version

Change your ROMMON to Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

New Member

Thank you all friend.   After

Thank you all friend.   After I change to new ROM as you recommended.  It work fine.

I can issue no service password-recovery command on my router.

Thank you very much

porramed

New Member

it is a ROMMON security

it is a ROMMON security mechanism and highly depend on your ROMMON Version.

Hall of Fame Super Gold

I use c1841 with IOS

I use c1841 with IOS adventerprisek9-mz.124-15.T2.bin and try to configure with "no service password-recovery" command but I see only "no service password-encryption" command on the router. 

What for?  Even if you enable, I am still able to.  

92
Views
0
Helpful
6
Replies
This widget could not be displayed.