Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 1941 Router Nat Problem

Hi,

Just to give one example on my local web server ip 192.168.1.237 i want to be outside adress port 80 direct to 192.168.1.237 port 80

"ip nat inside source static tcp 192.168.1.237 80 interface GigabitEthernet0/0 80"

and

"ip nat inside source static tcp 192.168.1.237 80 interface x.x.x.x 80 extendable"

i tried as, opened ports but not not direct

I thought it was server error. But both of these existing linksys E4200 router port forwarding is working with. In the same way as I did for the camera does not reach the DVR.

Firstly, I think you need to resolve the DNS server. I'm nat inside her like this;

"ip nat inside source static tcp 192.168.1.227 53 interface GigabitEthernet0/0 53"

Port 53 opened but not redirected

Do you think that might cause or DNS server needs to be done for something different?

My config file is;

http://pastie.org/9395740#

4 REPLIES
New Member

Sorry, I don´t understand

Sorry, I don´t understand what do you want to do.

Are you NATting a port 80 to another port 80? Why?

New Member

Sorry my english is not good.

Sorry my english is not good...

Port forwarding doesn’t work? İ want to redirect incoming traffic from port 80 to the web server (port 80)

New Member

You don´t need port

You don´t need port forwarding for this, if you need what I think. You can try the next command instead what you posted:

ip nat inside source static 192.168.1.237 interface GigabitEthernet0/0

New Member

Same problem is my DVR

Same problem is my DVR i want to redirect incoming port 60000 to the 192.168.1.99 port 80 

101
Views
0
Helpful
4
Replies
CreatePlease login to create content