Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

Cisco 2500

Cisco 2500

Unit 0, memory error, csr0=0x88c3

??

Message was edited by: Barbara Chamberlain

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Cisco 2500

When is the error generating?  i.e. during boot, after post, during normal operation, randomly

Does the error lock the system up, cause performance issues, or does the device automatically restart?

while i dont agree with the last comment made it doesn't mean that you can't replace it.  You don't have to upgrade with a more up to date product, but you probabally can replace the 2500 for 10-30USD.

4 REPLIES
New Member

Re: Cisco 2500

Do you get any other messages with the error?

It could be hardware failure or just be that the memory isn't big enough to load something, like the config.

http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00801545eb.shtml

Also double check to make sure the flash is securely in place as a loose/damaged flash card can also spit this out for you.

Re: Cisco 2500

No other errors, devices is used as a terminal server FEP

Hall of Fame Super Gold

Re: Cisco 2500

Replace with current product.

New Member

Re: Cisco 2500

When is the error generating?  i.e. during boot, after post, during normal operation, randomly

Does the error lock the system up, cause performance issues, or does the device automatically restart?

while i dont agree with the last comment made it doesn't mean that you can't replace it.  You don't have to upgrade with a more up to date product, but you probabally can replace the 2500 for 10-30USD.

464
Views
0
Helpful
4
Replies
CreatePlease to create content