Cisco 2509 - % Destination unreachable; gateway or host down. Can someone help?
I am unable to connect to devices using. They are connected via async cable. Can someone take a look please?
Terminal#r1 Trying R1 (192.168.1.111, 2001)... % Destination unreachable; gateway or host down
Terminal#sh config Using 780 out of 32762 bytes ! version 12.2 service timestamps debug uptime service timestamps log uptime no service password-encryption no service dhcp ! hostname Terminal ! ! ip subnet-zero ip host S4 2008 192.168.1.111 ip host S3 2007 192.168.1.111 ip host S2 2006 192.168.1.111 ip host S1 2005 192.168.1.111 ip host R4 2004 192.168.1.111 ip host R3 2003 192.168.1.111 ip host R2 2002 192.168.1.111 ip host R1 2001 192.168.1.111 ! ! ! ! ! interface Loopback0 ip address 192.168.0.111 255.255.255.0 ! interface Ethernet0 ip address 192.168.1.111 255.255.255.0 ! interface Serial0 no ip address shutdown ! interface Serial1 no ip address shutdown ! ip classless ip http server ! ! line con 0 line 1 8 exec-timeout 0 0 no exec transport input all line aux 0 line vty 0 4 password ccna login ! end
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...