Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 2600 Leased line configuration

Hi All,

We have 2600 Cisco router and we take new  leased line. They gave the following ip's

182.75.137.100/30 - Wan IP

182.75.137.102 - IP

255.255.255.252 - subnet

182.75.137.101 - Gateway

182.75.34.224/29 - LAN IP

DNS: 202.56.230.7 - Primary

We configured and we getting internet but don't know how to use the LAN IP

Please help us. Thanks in advance.

Thanks

Shahinsha.Z

1 REPLY
Bronze

Hi,

Hi,

LAN IP is configuring to be on LAN port of the router which is connected physically and logically to LAN network ( clients network ) and configured to be gateway address for all clients inside the network that uses that router, also there is no need that the new internet provider to give you LAN IP because that is LAN administrators choice. 

My question is. How did you checked out that you have internet service if you already asking about LAN IP.

13
Views
0
Helpful
1
Replies