Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cisco 2610 HELP!!!

I just got a Cisco 3660 and using that as my main router instead of the 2610.  Instead of junking the 2610, is there any config that I could do with it.  I only have one ethernet port on the router.  Note: this is just a home lab/network.  I have tried looking on the net for possilbe solutions but I am unable to find any.  Thanks in advance for your help.

6 REPLIES
Silver

Re: Cisco 2610 HELP!!!

Jonathan,

You could create a dot1q trunk between the router and a switch.  This would enable you to have many logical interfaces propagated over a single physical interface.

Possible config:

### Router

int fa0/0
no shut
exit

int fa0/0.2
encapsulation dot1q 2
ip address 192.168.1.1 255.255.255.0
exit

int fa0/0.3
encapsulation dot1q 3
ip address 192.168.2.1 255.255.255.0
exit


This link is very helpful:

http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a00800949fd.shtml


Chris

New Member

Re: Cisco 2610 HELP!!!

I checked out the link, but I did not see that the 2610 was compatable with this setting.  Is that correct?

New Member

Re: Cisco 2610 HELP!!!

Jonathan,

This is a very old router, and is not even supported by Cisco.

Try the commends described above. If it will not work (that I'm not sure if the commands are supported) you'll be required to use a new one.

I would recommend that you use a new Cisco 1941 which will fit your case, and it's not expensive.

Cisco 1900 series:

http://www.cisco.com/en/US/products/ps10538/index.html

Cisco Routers:

http://www.cisco.com/en/US/products/hw/routers/index.html#~all-prod

New Member

Re: Cisco 2610 HELP!!!

Please check : show version

In the case you are not able to apply the previous configuration.

Silver

Re: Cisco 2610 HELP!!!

The 2610 router is a great tool to study with and 10baseT dot1q trunking is supported on it with IOS versions 12.2(2)T and latter.  If you find advanced features are not available you'll still find the platform very useful in a 'Back Bone' router role in a lab.



Chris

New Member

Re: Cisco 2610 HELP!!!

Here is my current config on the 2610....on the interface Ethernet0/0.2 and interface Ethernet0/0.3 what ip addresses are those supposed to be?

Right now my home lab looks like this:

Current configuration:
!
version 12.0
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
enable secret 5 $1$uRb2$UhXNZFp84pf2jqO4gsh1A1
enable password 999henry
!
username woodjl1650 privilege 15 password 0 henry999
username woodjl
!
!
!
!
ip subnet-zero
!
ip dhcp pool Home
!
!
!
!
process-max-time 200
!
interface Ethernet0/0
no ip address
ip directed-broadcast 1
no ip mroute-cache
!
interface Ethernet0/0.2
encapsulation dot1Q 2
ip address 192.168.1.1 255.255.255.0
no ip directed-broadcast
no ip mroute-cache
!
interface Ethernet0/0.3
encapsulation dot1Q 3
ip address 192.168.2.1 255.255.255.0
no ip directed-broadcast
no ip mroute-cache
!
interface BRI0/0
no ip address
no ip directed-broadcast
no ip mroute-cache
shutdown
isdn guard-timer 0 on-expiry accept
!
ip classless
ip http server
ip http authentication local
!
snmp-server engineID local 0000000902000004C05B93C0
snmp-server community public RO
!
line con 0
transport input none
line aux 0
line vty 0 4
privilege level 15
password henry999
login
!
!
no scheduler allocate
end

698
Views
0
Helpful
6
Replies
CreatePlease to create content