Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 2610XM router booting problem

I have two cisco 2610XN router but both are not booting properly and it shows the following attached error, How can i fix this problem .Please suggest me .

4 REPLIES

Re: Cisco 2610XM router booting problem

it could be software issue, I would suggest to load/install a new fresh IOS code, if you are getting a forced software crash reload which seems like the router is reloading in a loop bring the router to rommon> and install new image, try installing a different version from the current running version.. in the event that after reloading router with new image and do have same issue it could then be hardware, I have seen similar issues caused by software bugs or corrupted IOS codes and have been solved by reloading fresh code, try that.

HTH

Jorge

New Member

Re: Cisco 2610XM router booting problem

hi,

there's an error msg "Unexpected NM Interrupt received from slot: 1".

may be you can try to unplug the module and reload again.

cheers.

New Member

Re: Cisco 2610XM router booting problem

Ok , I did but problem not resolved.Thanks for reponse plase suggest me next step.

Regards,

Sujeet

Re: Cisco 2610XM router booting problem

Hi,

1.If you have newly installed the IOS & still it is giving problem

2.If you have removed the module, reinstalled & rebooted , still it is giving problem.

3.If you have removed the module , & then booted the router, but still it is giving problem

4.Then RMA the router & get the replacement

HTH...rate if helpful..

218
Views
0
Helpful
4
Replies