Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2811 and HWIC card

Hello All

I have a Cisco 2811 with IOS

C2800nm-ipbase-mz.124-3i.bin

I installed HWIC 1CE1T1-PRIA Card on it but I can not see in the config.

I tried many cards and slots on the router but still can not see

Any idea?

Thx

Ersin

7 REPLIES

Re: Cisco 2811 and HWIC card

The Minimum IOS requirement for the above card is 12.4(11)XW4 or 12.4(20)T

Upgrade the IOS and check again

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/product_data_sheet0900aecd80710c88_ps5949_Products_Data_Sheet.html

Narayan

New Member

Re: Cisco 2811 and HWIC card

I used the

c2800nm-ipbasek9-mz.124-20.YA1.bin

I can see the card during boot but not in the configuration ?????

New Member

Re: Cisco 2811 and HWIC card

Here is the line during boot

mart Init is enabled

smart init is sizing iomem

ID MEMORY_REQ TYPE

0003E7 0X00473800 C2811 Mainboard

000529 0X00164800 1 port channelized and PRI T1/E1 HWIC

0X000021B8 Onboard USB

0X002C29F0 public buffer pools

0X00211000 public particle pools

TOTAL: 0X00AADBA8

If any of the above Memory Requirements are

"UNKNOWN", you may be using an unsupported

configuration or there is a software problem and

system operation may be compromised.

Rounded IOMEM up to: 12Mb.

Using 4 percent iomem. [12Mb/256Mb]

Weird thing is even it is working and can bee seen in the config serial module is not here ???

Re: Cisco 2811 and HWIC card

Can you post a sh diag from your device

Narayan

New Member

Re: Cisco 2811 and HWIC card

I am booting with 12.4-20T1 I will post it in 5 mins

New Member

Re: Cisco 2811 and HWIC card

Ok problem solved

Thx for helping

Re: Cisco 2811 and HWIC card

Good to know that the problem has solved

Narayan

590
Views
0
Helpful
7
Replies
CreatePlease to create content