I have a C2811 router with 12.4.15(t10) IOS at a remote site which failed to reboot after a power cycling . I directed the on site tech to replace the flash card and reboot, and router recovered no problems. I wanted to look at the "bad" card and requested the tech re insert this card. As I executed a dir command, the router froze up and again had to be recovered using the spare flash card. Any ideas about what could be causing this behavior? Thanks
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...