Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

cisco 2811 router LAN ports

Hi ,

    i would to ask that ,how many extra interface port can be plugged in to the 2811 router ,there are 2 fixed FE port on this router and i have 3 connection

i.e one mpls link , one internet link  and one sip trunk .. some body confirm me  that i can insert module in 2811 ? in order to solve this problem

Thankyou in advance..

SHIB

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

cisco 2811 router LAN ports

Hi Ibrahim,

I prefer to buy a HWIC-4ESW card because you'll never push over a 100Mb of traffic through a 2800 series device.

If you are satisfied then please mark this question as answered.

Regards

please rate if it helps.

5 REPLIES
VIP Purple

Re: cisco 2811 router LAN ports

Hi Ibrahim,

If you insert a HWIC-4ESW card then you will get four more fastethernet ports:

FE0/0/0

FE0/0/1

FE0/0/2

FE0/0/3

is this you wanted to know. or somethingelse?

Regards

Please rate if it helps.

New Member

cisco 2811 router LAN ports

yes Thankyou , but one more thing  which type of card for sip trunk should i use? i mean GE or FE?...

VIP Purple

cisco 2811 router LAN ports

As per my knowledge you have to use GE for the SIP trunk.

Regards

Please rate if it helps.

New Member

cisco 2811 router LAN ports

So which card model .i will order??

VIP Purple

cisco 2811 router LAN ports

Hi Ibrahim,

I prefer to buy a HWIC-4ESW card because you'll never push over a 100Mb of traffic through a 2800 series device.

If you are satisfied then please mark this question as answered.

Regards

please rate if it helps.

605
Views
10
Helpful
5
Replies
CreatePlease to create content