Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 2811 router memory?

Hi to everybody,

We have 2 Cisco 2811 and we want to upgrade to the last IOS. The problem is these routers have 256MB  RAM and 64MB  flash.

Reading on 2811 router datasheet its said the the maximum allowed is :

Max DRAM: 768MB

Max FLASH: 256 MB

But on the new IOS information say that is recommended 1GBm RAM.

And the question is, We can really put 1GB RAM?



Cisco 2811 router memory?

Hi Zamo,

the max DRAM will remain 768 MB and it is no use to install the 15.X IOS unless having very specific requirements like the full PFR features. I would like anyway to point out another issue you would face.. Your 2811 is a very nice well-built machine that is based on the previous generation of ISR hardware. The main memory on the 2900 series for example, is managed by a different set of hardware and you would not achieve the same result even if you could install 1GB of RAM on your 2811. At last let me give you two info more:

a) 12.4T(24) is a very brilliant rich-features IOS and i'd say you should consider it as a solution

b) I have many 2900 series working with even 15.2T and 512 MB RAM (NO BGP ON THEM!!!)

Take Care


Cisco 2811 router memory?

If my understanding is correct, newer Call Manager releases can only be implemented in newer versions of IOS. CME8.6 or 9 for example which add a ton of new features.

I could be wrong, there is a lot of stuff you can pull off outside of what cisco recommends.

Hall of Fame Super Gold

Re: Cisco 2811 router memory?

I've got some 2811 with 512 DRAM and they're loaded with15.1(1)T IOS since September 2010.  No problem.