Hi
cisco 2811 router not booting.its produce following error
System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)
*** Emulating mis-aligned load at 0xe8ce3702
Copyright (c) 2005 by cisco Systems, Inc.C = 0xbfc0a808 ... failed, opcode = 0x2b
Initializing memory for ECC
.
program load complete, entry point: 0x8000f000, size: 0xc940
*** Emulating mis-aligned loa
System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)a808 ...
failed, opcode = 0x2b02
Copyright (c) 2005 by cisco Systems, Inc.e8ce3702b
Initializing memory for ECC08 ... failed, opcode = 0x2
.2
c2811 processor with 262144 Kbytes of main memorymulating mis-aligned load at
0xe8ce3702b
Main memory is configured to 64 bit mode with ECC enabled failed, opcode = 0x2b02
Readonly ROMMON initializedaligned load at 0xe8ce3702b
program load complete, entry point: 0
*** Emulating mis-aligned load at 0xe8ce3702oad at 0xe8ce3702
PC = 0xbfc0a808 ... failed, opcode = 0x2bed, opcode = 0x2b
*** Emulating mis-aligned load at 0xe8ce3702oad at 0xe8ce3702
PC = 0xbfc0a808 ... failed, opcode = 0x2bed, opcode = 0x2b
*** Emulating mis-aligned load at 0xe8ce3702oad at 0xe8ce3702
PC = 0xbfc0a808 ... failed, opcode = 0x2bed, opcode = 0x2b
*** Emulating mis-aligned load at 0xe8ce3702oad at 0xe8ce3702
PC = 0xbfc0a808 ... failed, opcode = 0x2bed, opcode = 0x2b
PC = 0xbfc0a808 ... failed, opcode = 0x2b02
*** Emulating mis-aligned load at 0xe8ce3702b
PC = 0xbfc0a808 ... failed, opcode = 0x2b02
*** Emulating mis-aligned load at 0xe8ce3702b
PC = 0xbfc0a808 ... failed, opcode = 0x2b02
Please help me to resolve this issue
thanks in advance
Mohana sundaram.S
