I have a brand new Cisco 2901 Router. Like aslam.bajwa in this thread, PBR was not working on our Cisco 2901 ISR. Does the Cisco 2901 ISR require an additional license for PBR? (Answer = NO, see link (1) below)
Do I need an IOS update to fix the problem? (Answer = NO, see Revision Nov 20, 2012 below).
If an upgrade is needed, will this break the router's SEC license as aslam.bajwa is concerned about? (NOT ANSWERED)
My router is a Cisco 2901/K9, version 1.0, purchased Aug 2012.
Nov 20, 2012: The PBR was working in my Cisco 2901 ISR. A sequence of scripted configuration commands in the Cisco 2901 was causing a disconnect in one of our ISP routers (an SMC cablemodem/router) which made it look like the PBR was not working. My PBR issues are resolved and it is working reasnably well. My problem turned out to not be license related.
Nov 6, 2012: Added Link to document that specifies Cisco 2900 ISR supports PBR by default.
Nov 5, 2012: Clarify that the problem of PBR not working on Cisco 2900 is common to 2 subscribers to this thread.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...