Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2950

Pls tell how to upload .tar file to flash and ativate boot image?

And what form following IOS I can use to restore booting of the switch. In my 2950 flash and nvram are erased with command:

"erase nvram" and "erase flash".

C2950 EI AND SI IOS CRYPTO IMAGE

c2950-i6k2l2q4-mz.121-22.EA11.bin

C2950 EI AND SI IOS CRYPTO AND WEB BASED DEVICE MANAGER

c2950-i6k2l2q4-tar.121-22.EA11.tar

C2950 EI AND SI IOS IMAGE

c2950-i6q4l2-mz.121-22.EA11.bin

C2950 EI AND SI IOS IMAGE AND WEB BASED DEVICE MANAGER

c2950-i6q4l2-tar.121-22.EA11.tar

2 REPLIES
New Member

Re: Cisco 2950

While starting I see:

C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)

Compiled Mon 22-Jul-02 17:18 by antonino

WS-C2950T-24 starting...

Base ethernet MAC Address: 00:15:63:d7:3e:80

Xmodem file system is available.

Initializing Flash...

flashfs[0]: 0 files, 1 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 7741440

flashfs[0]: Bytes used: 1024

flashfs[0]: Bytes available: 7740416

flashfs[0]: flashfs fsck took 4 seconds.

...done initializing flash.

Boot Sector Filesystem (bs:) installed, fsid: 3

Parameter Block Filesystem (pb:) installed, fsid: 4

Loading ""...: permission denied

Error loading ""

Interrupt within 5 seconds to abort boot process.

Boot process failed...

The system is unable to boot automatically. The BOOT

environment variable needs to be set to a bootable

image.

switch:

switch:

435
Views
0
Helpful
2
Replies
CreatePlease to create content