I need help on determining whether the Cisco 3560x platform is capable of supporting DLSw and whether additional licenses are required to enable this feature. I will be running the IP services software image and be using DLSw to carry IBM SNA traffic across an MPLS network. I have tried using the Cisco feature navigator but I cannot see the 3560 in the list of platforms. Any help would be appreciated as I am struggling to find any supporting documentation.
I did find the 3560 in the Feature Navigator (you need to look for CAT3560 and not just 3560). I do not find any mention of support for DLSW on this platform. I do find support for DLSW on several of the ISR router platforms but not for any of the Catalyst switches. If you need to support DLSW then you may need to look into a router as the solution.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...