Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 3750 Switch Problem: POST: inline power post failed for ALL ports

Need Help with WS-C3750-48PD-S switch.

We have a switch that started functioning abruptly.

The switch boots normally but after POST, however, all Copper ports on the switch remains amber instead of blinking green.

We then captured the information during while boot and during POST.

Our log file displays:

POST: Inline Power Controller Tests : Begin

POST: inline power post failed for port 0

.

.

.

POST: inline power post failed for port 47

for all ports.

what sort of problem is this? Can anybody suggest.

Note: Attached the log file for convenience.

Waiting for response,

Sariful, Dhaka, Bangladesh

              

3 REPLIES

Cisco 3750 Switch Problem: POST: inline power post failed for AL

Hi Sariful,

The Switch has developed a permanent hardware failure and needs to be replaced at the earliest. Kindly do the needful.


***********Plz do rate this post if you found it helpful*************************


Thanks & Regards,


Vignesh R P

Hall of Fame Super Gold

Cisco 3750 Switch Problem: POST: inline power post failed for AL

There's nothing you can do.  The switch needs to be RMAed.

New Member

hi,  its better to return

hi,

 

 

its better to return back that switch to your service partner.

4815
Views
0
Helpful
3
Replies