I had a check in cisco product configurator tool, and this tool does not add HWIC-4T when 3845 V3PN bundel is selected. The point is to know whether the HWIC slots are full when this bundel is purchased or we can add this module later on.... There is some confusion.
I have just checked it in the product configuration tool and yes it is not listed there.
Ad per the product explanation 3845 V3PN bdle,AIM-VPN,PVDM2-64,CCME-240,AdvIPServ,64F/256D
concers this doesnot have any HWIC/WIC module inlcuded that means we can use any HWIC/WIC card in the router later.
Its strange to me as well why it is not listed there, but I am pretty sure that you still will be able to use it in the router. You have got WIC-2t listed there under the HWIC/WIC option and you can take that one if you want.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...