Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Cisco 3925/ATM-1A-T3 ATM

Hi,

I am trying to install an ATM module on Cisco 3925 router. We have purchased the SM-NM-ADPTR module so we can make use of the old ATM card we used in 3845.

I also have the appropriate license which is DATA but the router still cannot detect the said card.

What else should I do for the router to recognize the said module.

Slot 1:

        SM-NM-ADPTR

        Port Adapter is analyzed

        Port Adapter insertion time 00:06:08 ago

        EEPROM contents at hardware discovery:

        PCB Serial Number        : FOC16207K1L

        Hardware Revision        : 1.0

        Part Number              : 73-12434-04

        Top Assy. Part Number    : 800-32481-01

        Board Revision           : G0

        Deviation Number         : 0

        Fab Version              : 05

        RMA Test History         : 00

        RMA Number               : 0-0-0-0

        RMA History              : 00

        Product (FRU) Number     : SM-NM-ADPTR

        Version Identifier       : V01

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF C1 8B 46 4F 43 31 36 32 30 37 4B 31 4C 40

          0x10: 05 F4 41 01 00 82 49 30 92 04 C0 46 03 20 00 7E

          0x20: E1 01 42 47 30 88 00 00 00 00 02 05 03 00 81 00

          0x30: 00 00 00 04 00 CB 8B 53 4D 2D 4E 4D 2D 41 44 50

          0x40: 54 52 89 56 30 31 00 D9 03 40 C1 CB F3 00 03 40

          0x50: 0B E3 FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        Unknown (type 426) Port adapter

        Port adapter is disabled

        Port adapter insertion time unknown

        EEPROM contents at hardware discovery:

        Hardware Revision        : 1.0

        Top Assy. Part Number    : 800-06137-03

        Board Revision           : A1

        Deviation Number         : 0-0

        Fab Version              : 06

        PCB Serial Number        : FOC10063RQT

        RMA Test History         : 00

        RMA Number               : 0-0-0-0

        RMA History              : 00

        Product (FRU) Number     : NM-1A-T3

        Version Identifier       : V01

        Unknown Field (type 0086): FF FF FF FF

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF 40 01 AA 41 01 00 C0 46 03 20 00 17 F9 03

          0x10: 42 41 31 80 00 00 00 00 02 06 C1 8B 46 4F 43 31

          0x20: 30 30 36 33 52 51 54 03 00 81 00 00 00 00 04 00

          0x30: CB 88 4E 4D 2D 31 41 2D 54 33 89 56 30 31 20 86

          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF 4D 2E

Thanks in advance.

John

3 REPLIES
Hall of Fame Super Gold

Re: Cisco 3925/ATM-1A-T3 ATM

ISR G2 routers do not support NM-1A-T3 modules, however they do support NM-1A-T3/E3, that replaced the first.

http://www.cisco.com/en/US/prod/collateral/routers/ps10538/aag_c07_563807.pdf

Cisco 3925/ATM-1A-T3 ATM

This is harsh. So we will need to purchase new ATM cards?

Hall of Fame Super Gold

Cisco 3925/ATM-1A-T3 ATM

If you want ATM on that router, yes.

Please remember to rate useful posts clicking on the stars below. (indipendently if facts meet your hopes and convenience).

641
Views
4
Helpful
3
Replies