09-03-2012 03:06 AM - edited 03-04-2019 05:27 PM
Hi,
I am trying to install an ATM module on Cisco 3925 router. We have purchased the SM-NM-ADPTR module so we can make use of the old ATM card we used in 3845.
I also have the appropriate license which is DATA but the router still cannot detect the said card.
What else should I do for the router to recognize the said module.
Slot 1:
SM-NM-ADPTR
Port Adapter is analyzed
Port Adapter insertion time 00:06:08 ago
EEPROM contents at hardware discovery:
PCB Serial Number : FOC16207K1L
Hardware Revision : 1.0
Part Number : 73-12434-04
Top Assy. Part Number : 800-32481-01
Board Revision : G0
Deviation Number : 0
Fab Version : 05
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : SM-NM-ADPTR
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 36 32 30 37 4B 31 4C 40
0x10: 05 F4 41 01 00 82 49 30 92 04 C0 46 03 20 00 7E
0x20: E1 01 42 47 30 88 00 00 00 00 02 05 03 00 81 00
0x30: 00 00 00 04 00 CB 8B 53 4D 2D 4E 4D 2D 41 44 50
0x40: 54 52 89 56 30 31 00 D9 03 40 C1 CB F3 00 03 40
0x50: 0B E3 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Unknown (type 426) Port adapter
Port adapter is disabled
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.0
Top Assy. Part Number : 800-06137-03
Board Revision : A1
Deviation Number : 0-0
Fab Version : 06
PCB Serial Number : FOC10063RQT
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : NM-1A-T3
Version Identifier : V01
Unknown Field (type 0086): FF FF FF FF
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 01 AA 41 01 00 C0 46 03 20 00 17 F9 03
0x10: 42 41 31 80 00 00 00 00 02 06 C1 8B 46 4F 43 31
0x20: 30 30 36 33 52 51 54 03 00 81 00 00 00 00 04 00
0x30: CB 88 4E 4D 2D 31 41 2D 54 33 89 56 30 31 20 86
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF 4D 2E
Thanks in advance.
John
09-03-2012 03:08 AM
ISR G2 routers do not support NM-1A-T3 modules, however they do support NM-1A-T3/E3, that replaced the first.
http://www.cisco.com/en/US/prod/collateral/routers/ps10538/aag_c07_563807.pdf
09-03-2012 03:15 AM
This is harsh. So we will need to purchase new ATM cards?
09-03-2012 03:19 AM
If you want ATM on that router, yes.
Please remember to rate useful posts clicking on the stars below. (indipendently if facts meet your hopes and convenience).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide