Cisco 3945 channel-group on switching interfaces of EHWIC-4ESG module

[Nikolay Pestov]

Hello.

I have router Cisco 3945 with switching module EHWIC-4ESG, IOS version c3900-universalk9-mz.SPA.153-1.T.bin

The problem is that I cannot including switching interfaces (gi0/0/0 - 0/0/3) in created channel-group, that is no command "channel-group" in

"(config-if)# " on switching interfaces:

(config-if)#channel-group

                          ^

% Invalid input detected at '^' marker.

What's wrong?

[paolo bevilacqua]

Nothing is wrong. These cards are just entry-level "dumb" switches without many features.

And, the router would not move more than 1 Gbps anwyay.