Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 4006 problem

I am having Cisco 4006 switch and I have connected three cisco 2950 switch through fiber connecter. All the three switchs are showing in CDP neighbor but un able to ping one switch. I have cleard the mac table , cleared the trunk but one switch is showing cdp unable to ping .

2 REPLIES
Hall of Fame Super Silver

Re: Cisco 4006 problem

Hello Thiru,

if the link is an 802.1Q L2 trunk check if there is a native vlan mismatch on the two sides

use

sh int typex/y switchport

check also the list of vlans allowed on both sides.

Hope to help

Giuseppe

New Member

Re: Cisco 4006 problem

HI Giuseppe,

Thanks for this Destils.

There was problem in Module , the Service Engineer is faulty. Hence i have removed the switch which is connected from that faulty module and connected to another working switch. Now everything seems normal . let you know if am getting anythings. :)

117
Views
0
Helpful
2
Replies