Hi, we're seeing occassional temperature alarms on a Catalyst 4006. Does anyone know whether there are multiple sensors fitted on the backplane? ( as is the case with a 6500 ) or whether there is just a single sensor fitted to the supervisor engine? The answer affects the downtime slot and the potential heaps of planning I may need to do! thanks for your responses, Mike
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...