Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

cisco 4503


first I explain my scenario . our core switch is(4503). we have two firewall(ASA 5510) and with two different isp connection  .

firewall-1 = A

firewall-2 = B

in core switch default route is to firewall -1 =A. some of the traffic like specific destination external ip only we forwarded to firewall-2=B. now I want to know how to forward one specific host(internal) traffic forward to any destination via firewall-2=B. I think I can do via route map. could you please suggest me with sample .


New Member

Try this,enableconfigure

Try this, it will depend on whether or not you are running the correct IOS and if you have enterprise services enabled.



configure terminal

ip access-list standard 99

permit host (insert ip of specific host)


Route-Map Test

match ip address 99

set ip next-hop (insert ip of next hop firewall)


ip local policy route-map Test


One thing to note on this configuration is that egress traffic for this device will leave out of the respective firewall, but ingress will come in with all the rest of the traffic.



Hi , thanks for your Reply.

Hi ,


thanks for your Reply. im not able to use this command (red color font ). ip local policy or ip policy.

Note : my ios is cat4500-ipbasek9-mz.122-53.SG2.bin. I need to upgrade firmware. if it is which one.

New Member

it looks like that image only

it looks like that image only has IP Base which does not support Policy Based Routing. In order to enable that feature you will need Enterprise Services.


"The IP Base image does not support enhanced routing features such as NSF/SSO, BGP, EIGRP, EIGRPv6, OSPF, OSPFv3, IS-IS, Internetwork Packet Exchange (IPX), AppleTalk, VRF-lite, and Policy-Based Routing (PBR). "



CreatePlease login to create content