Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 7204 100% CPU with OC3 module?

Hi,

i bought new RF Cisco 7204VXR NPE-G1.

As soon i enable OC3 module ( PA-POS-OC3SMI) CPU of the router shoot to 100%, and if i reboot the router, it wont comeback not even on Console.

I had to remove the POS card and then boot router and then hot insert the module.

so i put the command

int pos 4/0

loopback internal

as soon igave this command, CPU dropped down to normal.

Whats the deal here? now i need to activate the circuit on this POS interface, but as soon i remove loopback internal command , CPU shoots to 100%

Although CPU sorted dont show any process causing it.

any idea?

    9999999999999999999999999999999999999999999999999999999999

    5555533333111114444444444777774444466666777775555566666444

100 *****                    *****     ********************

90 ************************************************************

80 ************************************************************

70 ************************************************************

60 ************************************************************

50 ************************************************************

40 ************************************************************

30 ************************************************************

20 ************************************************************

10 ************************************************************

   0....5....1....1....2....2....3....3....4....4....5....5....

             0    5    0    5    0    5    0    5    0    5

               CPU% per second (last 60 seconds)

CPU utilization for five seconds: 95%/96%; one minute: 95%; five minutes: 79%

PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process

120         460   2738070          0  0.16%  0.19%  0.17%   0 RBSCP Background

   2       14840     54802        270  0.08%  0.03%  0.01%   0 Load Meter

216        1008    275696          3  0.08%  0.02%  0.00%   0 NTP

107       14252    547872         26  0.08%  0.10%  0.11%   0 DHCPD Receive

212        1104     17867         61  0.08%  0.01%  0.00%   0 PDU DISPATCHER

211        3568     35725         99  0.08%  0.03%  0.00%   0 IP SNMP

  56          76    274011          0  0.08%  0.00%  0.00%   0 ISA Common Helpe

207         716   2738358          0  0.08%  0.12%  0.13%   0 CCPROXY_CT

  93          60    273936          0  0.08%  0.01%  0.00%   0 Socket Timers

  40         772    275060          2  0.08%  0.04%  0.02%   0 Per-Second Jobs

104         120    273967          0  0.08%  0.01%  0.00%   0 RUDPV1 Main Proc

  68       16716    135866        123  0.08%  0.18%  0.10%   0 IP Input

  12          20    273971          0  0.00%  0.00%  0.00%   0 IPC Periodic Tim

  14           0         1          0  0.00%  0.00%  0.00%   0 IPC Seat Manager

  13          44    273971          0  0.00%  0.00%  0.00%   0 IPC Deferred Por

  11           0         1          0  0.00%  0.00%  0.00%   0 IPC Zone Manager

  17           0         1          0  0.00%  0.00%  0.00%   0 OIR Handler

  18           0         1          0  0.00%  0.00%  0.00%   0 Crash writer

  10           0      4568          0  0.00%  0.00%  0.00%   0 IPC Dynamic Cach

  15           0         1          0  0.00%  0.00%  0.00%   0 IPC BackPressure

   9           4         2       2000  0.00%  0.00%  0.00%   0 ATM VC Auto Crea

  22           0         1          0  0.00%  0.00%  0.00%   0 AAA_SERVER_DEADT

  16      171340    274564        624  0.00%  0.00%  0.00%   0 EnvMon

  19        5476     66968         81  0.00%  0.01%  0.00%   0 ARP Input

  25          40         4      10000  0.00%  0.00%  0.00%   0 Entity MIB API

  26          28        37        756  0.00%  0.00%  0.00%   0 EEM ED Syslog

  27          92     68502          1  0.00%  0.00%  0.00%   0 HC Counter Timer

  28           0         2          0  0.00%  0.00%  0.00%   0 Serial Backgroun

  20           0         2          0  0.00%  0.00%  0.00%   0 ATM Idle Timer

  30           0         1          0  0.00%  0.00%  0.00%   0 RO Notify Timers

  31           0         1          0  0.00%  0.00%  0.00%   0 RMI RM Notify Wa

  21           4         2       2000  0.00%  0.00%  0.00%   0 AAA high-capacit

  23           4         1       4000  0.00%  0.00%  0.00%   0 Policy Manager

  34           0         1          0  0.00%  0.00%  0.00%   0 SERIAL A'detect

  35           0         2          0  0.00%  0.00%  0.00%   0 XML Proxy Client

Everyone's tags (5)
1 REPLY
New Member

Cisco 7204 100% CPU with OC3 module?

ok issue resolved:)

i need to add this command under POS interface

pos scramble-atm

thank you for viewing this thread

373
Views
5
Helpful
1
Replies
CreatePlease to create content