I got an old 7206 non-VXR with NPE-150. I tried different IOS versions (mostly 12.2.x), but none seems to work. I always get invalid opcodes. So what's the latest version that should work on the 7206 non-VXR with NPE-150 and supports the following features:
Sorry, I should have been more specific where I got the info from. I was using software advisor tool as well to get the info.
Martin, unfortunately CCO shows 12.2 ZD as deferred image and isn't available for download as such. That seems to be the latest image available for your hardware configuration. The next one that comes up is c7200-is-mz.12.1-26.E8 but this one doesn't support ipv6 but does support the other 3 features you need.
If you want to get a definite answer then you may have to open a TAC case.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...