cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1359
Views
0
Helpful
1
Replies

Cisco 7206VXR G2 number of routing table entry

baoqycisco
Level 1
Level 1

Hi, Can any one help me to find the maximun number of routing table entries Cisco 7206VXR G2 can handle, if possible, please also provide the reference.

Many thanks.

1 Accepted Solution

Accepted Solutions

arun kumar
Level 1
Level 1

HI,

NPEG2 comes with default RAM of 1GB which is well adequate to hold full internet routes. In our network, NPEG2 are running with 3.5 lakhs of internet routes still around 460MB of  Processor memory free. BGP routes alone hold 41MB of memory ("show ip bgp sum" gives you memory hold by BGP).

If you are opting to receive full internet feed, then select IOS which has BGP-Next Hop Tracking feature which reduces significant load on CPU due to BGP scanner.

HTH..

thanks

Arun

Pls rate if it is helpful

View solution in original post

1 Reply 1

arun kumar
Level 1
Level 1

HI,

NPEG2 comes with default RAM of 1GB which is well adequate to hold full internet routes. In our network, NPEG2 are running with 3.5 lakhs of internet routes still around 460MB of  Processor memory free. BGP routes alone hold 41MB of memory ("show ip bgp sum" gives you memory hold by BGP).

If you are opting to receive full internet feed, then select IOS which has BGP-Next Hop Tracking feature which reduces significant load on CPU due to BGP scanner.

HTH..

thanks

Arun

Pls rate if it is helpful

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card