Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 7507 GEIP Strange Issue

I have strange issue with 7507. I have added a new GEIP controller into it.

By adding this GEIP controller the CPU usage has been increased up to 20%.

The strange thing is that CPU usage is always normal + 20% and there is no traffic on this interface ( even if interface is shutdown the usage remains same ). And if there is traffic it's same J

I can't see the process taking this high CPU utilization if I look into CPU usage stats.

What the heck has happened to this? J

Here are CPU stats:

Router# #show proc cpu | excl 0.00%__0.00%__0.00%

CPU utilization for five seconds: 15%/13%; one minute: 15%; five minutes:

13%

PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process

5 518320 41974 12348 0.00% 0.11% 0.11% 0 Check heaps

20 66004 924869 71 0.08% 0.01% 0.00% 0 IPC Seat

Manager

22 204088 1466063 139 0.00% 0.03% 0.02% 0 ARP Input

31 7080 1609 4400 0.98% 1.44% 0.59% 2 Virtual Exec

52 117672 5843 20138 0.00% 0.02% 0.00% 0 Per-minute

Jobs

73 3586004 17990635 199 0.82% 0.60% 0.49% 0 IP Input

189 38964 213398 182 0.00% 0.01% 0.00% 0 IP SNMP

191 56184 104952 535 0.00% 0.01% 0.00% 0 SNMP ENGINE

196 160560 1397067 114 0.08% 0.01% 0.00% 0 BGP Router

197 49200 250208 196 0.00% 0.01% 0.00% 0 BGP I/O

IOS version:

IOS Version 12.4(3a)

Controller

Router# sh ver | inc GEIP

1 GEIP controller (1 GigabitEthernet).

1 GEIP controller (1 GigabitEthernet)

2 REPLIES
Silver

Re: Cisco 7507 GEIP Strange Issue

What is memory You have?

New Member

Re: Cisco 7507 GEIP Strange Issue

GEIP Controller Memory Size: 128 MBytes DRAM, 4096 KBytes SRAM

And

Cisco RSP8 (R7000) processor with 256MBytes memory.

96
Views
0
Helpful
2
Replies