04-03-2007 03:57 AM - edited 03-03-2019 04:23 PM
We are unable to commission 2 Mbps link
between our two offices,
A end: cisco 1700 with WIC 2T Status : both s1 and S0 is up
B end: cisco 805 with Serial interface Status: Serial 0 down Error: SPEED EXCEEDS 512K INTERFACE SHUTDOWN
Can you please give suggestion .....
04-03-2007 04:43 AM
Hi,
It looks like clocking problem but I'm not too sure. Can you confirm with your line provider if the CSU setting is correct? For a while, here is a link to troubleshooting serial line problems http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800a758d.shtml
04-03-2007 07:00 AM
The 805 does not support serial speed faster than 512 Kbps, please read
http://newsroom.cisco.com/dlls/fspnisapib78b.html
Hope this helps, please rate useful posts using scrollbox below
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: