Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 836 with 16 MBit t-dsl ?

Hi *,

is there a way to use a cisco 836 at a 16 MBit ADSL from t-online ?

ROM: System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)

System image file is "flash:c836-k9o3s8y6-mz.124-17.bin"

when I connect it to the DSL the debug shows:

Feb 21 07:58:12.642: DSL: 1: Modem state = 0x8

Feb 21 07:58:13.050: DSL: Received response: 0x22

Feb 21 07:58:13.050: DSL: Open failed: The ATU-C and ATU-R are not configured fo

r a common mode of operation -- retrying

Feb 21 07:58:13.050: DSL: Modem has open failed for 5 time(s)

Feb 21 07:58:16.050: DSL: Trying to bring up DSL line using Embedded firmware ve

rsion : 4.10.1

Feb 21 07:58:16.050: DSL: Send ADSL_OPEN command.

Feb 21 07:58:16.050: DSL: Using subfunction 0xB

Feb 21 07:58:16.050: DSL: Using subfunction 0xB

Feb 21 07:58:16.050: LOCAL:Max noise margin for power cutoff 31

Feb 21 07:58:16.050: DSL: Sent command 0x3

Feb 21 07:58:18.550: DSL: 1: Modem state = 0x8

Feb 21 07:58:18.954: DSL: Received response: 0x22

Feb 21 07:58:18.954: DSL: Open failed: The ATU-C and ATU-R are not configured fo

r a common mode of operation -- retrying

Feb 21 07:58:18.954: DSL: Modem has open failed for 6 time(s)

Feb 21 07:58:21.954: DSL: Trying to bring up DSL line using Embedded firmware ve

rsion : 4.10.1

Feb 21 07:58:21.954: DSL: Send ADSL_OPEN command.

Feb 21 07:58:21.954: DSL: Using subfunction 0xB

Feb 21 07:58:21.954: DSL: Using subfunction 0xB

Feb 21 07:58:21.954: LOCAL:Max noise margin for power cutoff 31

Feb 21 07:58:21.954: DSL: Sent command 0x3

Feb 21 07:58:24.454: DSL: 1: Modem state = 0x8

Feb 21 07:58:24.858: DSL: Received response: 0x22

Feb 21 07:58:24.862: DSL: Open failed: The ATU-C and ATU-R are not configured fo

r a common mode of operation -- retrying

Feb 21 07:58:24.862: DSL: Modem has open failed for 7 time(s)

Feb 21 07:58:24.862: DSL: Connection has reached max retries, toggle to other mo

de

Feb 21 07:58:27.862: DSL: SM: [DMTDSL_DO_OPEN -> DMTDSL_INIT]

Feb 21 07:58:28.862: DSL: SM: [DMTDSL_INIT -> DMTDSL_DLOAD_1]

Feb 21 07:58:28.862: DSL: Using Firmware Embedded in IOS

Feb 21 07:58:28.862: DSL: Downloading ASW_init_4_10_1.bin

Feb 21 07:58:28.866: DSL: Downloaded 3 blocks... Finished!

Feb 21 07:58:28.866: DSL: Sent command 0x14

Feb 21 07:58:32.774: DSL: Received response: 0x80

Feb 21 07:58:32.774: DSL: SM: [DMTDSL_DLOAD_1 -> DMTDSL_DLOAD_2]

Feb 21 07:58:32.774: DSL: Downloading ASW_R4_10_1.bin

Feb 21 07:58:32.870: DSL: Downloaded 100 blocks

Feb 21 07:58:32.962: DSL: Downloaded 200 blocks

Feb 21 07:58:33.058: DSL: Downloaded 300 blocks

Feb 21 07:58:33.150: DSL: Downloaded 400 blocks

Feb 21 07:58:33.246: DSL: Downloaded 500 blocks

Feb 21 07:58:33.338: DSL: Downloaded 600 blocks

Feb 21 07:58:33.346: DSL: Downloaded 610 blocks... Finished!

Feb 21 07:58:33.346: DSL: Sent command 0x14

Feb 21 07:58:35.345: changed current state to do open!!

Feb 21 07:58:35.345: DSL: SM: [DMTDSL_DLOAD_2 -> DMTDSL_DO_OPEN]

Feb 21 07:58:35.345: DSL: Trying to bring up DSL line using Embedded firmware ve

rsion : 4.10.1

Feb 21 07:58:35.345: DSL: Send ADSL_OPEN command.

Feb 21 07:58:35.345: DSL: Using subfunction 0x11

Feb 21 07:58:35.345: DSL: Using subfunction 0x11

Feb 21 07:58:35.345: LOCAL:Max noise margin for power cutoff 31

Feb 21 07:58:35.345: DSL: Sent command 0x6

Feb 21 07:58:37.845: DSL: 1: Modem state = 0x8

Feb 21 07:58:38.257: DSL: Received response: 0x22

Feb 21 07:58:38.257: DSL: Open failed: The ATU-C and ATU-R are not configured fo

r a common mode of operation -- retrying

1 REPLY
Hall of Fame Super Gold

Re: Cisco 836 with 16 MBit t-dsl ?

You can try ADSL FW 4.10.9 from

ftp://ftp.cisco.com/pub/access/800/

708
Views
0
Helpful
1
Replies