02-27-2006 07:03 PM - edited 03-03-2019 11:53 AM
Hello.
I have the next problem:
10.194.0.0/24 is the network behind the 851 router. (LAN)
192.168.224.0/24 the network ahead the 851 (WAN)
I need to translate 10.194.0.0/24 to the IP address of router WAN (192.168.224.x/24; x-number of each cisco 851) if destination is everywhere but 192.168.2.0/24.
And if destination is 192.168.2.0/24 simple routing will appears.
Please, help me to configure the device if it is possible.
02-27-2006 07:11 PM
Hi,
Try this:
interface ethernet 0
ip nat inside
!
interface
ip nat outside
!
ip nat inside source route-map Map1 interface
!
route-map Map1 permit 10
match ip address 101
!
access-list 101 deny 10.194.0.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 101 permit 10.194.0.0 0.0.0.255 any
Hope that helps - pls rate the post if it does.
Paresh
02-27-2006 09:03 PM
Thanks a lot! The problem is solved!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide