Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cisco 851, NAT

Hello.

I have the next problem:

10.194.0.0/24 is the network behind the 851 router. (LAN)

192.168.224.0/24 the network ahead the 851 (WAN)

I need to translate 10.194.0.0/24 to the IP address of router WAN (192.168.224.x/24; x-number of each cisco 851) if destination is everywhere but 192.168.2.0/24.

And if destination is 192.168.2.0/24 simple routing will appears.

Please, help me to configure the device if it is possible.

2 REPLIES
Purple

Re: cisco 851, NAT

Hi,

Try this:

interface ethernet 0

ip nat inside

!

interface

ip nat outside

!

ip nat inside source route-map Map1 interface overload

!

route-map Map1 permit 10

match ip address 101

!

access-list 101 deny 10.194.0.0 0.0.0.255 192.168.2.0 0.0.0.255

access-list 101 permit 10.194.0.0 0.0.0.255 any

Hope that helps - pls rate the post if it does.

Paresh

New Member

Re: cisco 851, NAT

Thanks a lot! The problem is solved!

470
Views
5
Helpful
2
Replies