Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 851W PPPOE configuration

I am trying to configure a Cisco 851W for a PPPOE connetion to my ISP via it WAN fast ethernet 4 interface. For some reason I don't appear to be getting the PPPOE option when I configure my VPDN group. I have issued the following command

vpdn enable

vpdn group 1

request-dialin

and when I type in protocol the only option I get is l2tp.

I am running the latest version of software c850-advsecurityk9-mz.124-15.T1.bin

Does the 851W support pppoe? If so, has anyone configured one of these before?

Many thanks

1 REPLY
New Member

Re: Cisco 851W PPPOE configuration

I think I may have it, I just have to test it and will post an update.

interface FastEthernet4

pppoe enable

pppoe-client dial-pool-number 1

interface Dialer1

ip address negotiated

ip nat outside

ip virtual-reassembly

encapsulation ppp

ip tcp adjust-mss 1452

dialer pool 1

dialer-group 1

ppp authentication pap callin

ppp pap sent-username [DSL-Username] password [DSL-Password]

285
Views
0
Helpful
1
Replies