Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 867 (Annex A) - 8 IPs, 10 VLANS with Trunk to 2960

hi,

is it possible to bind 6 public IPs to the ADSL interface from the CISCO 867 (one IP per VLAN), that every VLAN has his own public IP?
So that i can NAT every Subnet/VLAN to the specific public IP.

The PCs are connected on the 2960 and they'll speak over the TrunkPort connected between Cisco867-----TRUNK-----Cisco2960

What are the max VLANS on the Cisco 867?
Are there NAT transl. Limits?


thx Konrad

Everyone's tags (5)
5 REPLIES

Re: Cisco 867 (Annex A) - 8 IPs, 10 VLANS with Trunk to 2960

Though information on Cisco doesnt explicitly says support for number of Vlans, it should be 0-4095, you may try creating vlan with #vlan ? you will get the number of vlan's supported. also you can perform NAT on this box, not an issue

You can create 8 different pools with 8 single IP addresses and allote pool to specific subnet.

here is the example to configure NAT on 867 box.

http://www.cisco.com/en/US/customer/docs/routers/access/800/860-880-890/software/configuration/guide/pppoenat.html#wp1053137

HTH

Hitesh Vinzoda

Pls rate useful posts

Bronze

Re: Cisco 867 (Annex A) - 8 IPs, 10 VLANS with Trunk to 2960

Look at the 'switch features' section of http://www.cisco.com/en/US/prod/collateral/routers/ps380/qa_c67_458826.html

I believe the 867 only supports 2 VLANs.

New Member

Re: Cisco 867 (Annex A) - 8 IPs, 10 VLANS with Trunk to 2960

hi kmccourt,

thanks, you are right! these models only supports 2 VLANs, so i have to get the 1900Series with ADSL Interface?

Have you an other Router suggestion?

thx

Bronze

Re: Cisco 867 (Annex A) - 8 IPs, 10 VLANS with Trunk to 2960

The 887 supports 8 VLANs.

(Edit). Sorry - I forgot you wanted 10 VLANs. I suppose another option would be an 1841 with ADSL HWIC.

New Member

Re: Cisco 867 (Annex A) - 8 IPs, 10 VLANS with Trunk to 2960

ok, i think the 1841 with hwic ADSL2 module (CISCO1841-ADSL2) is my solution.

do you know if in the broadband image from the broadbandbundle, the Firewall is included or i have to buy the CISCO1841-SEC/K9 image?

thx

1364
Views
0
Helpful
5
Replies
CreatePlease to create content