08-31-2006 03:22 AM - edited 03-03-2019 01:49 PM
Hello,
I'm have Cisco 871-K9
SDM version: 2.3
IOS version: 12.4(6)T2
In the URL Filtering section router says:
Application Firewall unavailable.
The IOS image in your router does not support the requested feature. To configure the feature, you need to go to the Software Center on Cisco.com and upgrade your IOS image to one that supports thyis feature set. URL Filtering
Any idea what to do.
Thank you in advance.
Andris
08-31-2006 03:53 AM
Hi
Can you give the IOS name?It should me advipservicesk9, but just making sure.....
Regards
JD
08-31-2006 03:56 AM
Hi Andris
Are you running your box with the following ios code c870-advipservicesk9-mz.12.4-6.T.bin ?
Do confirm the exact ios code name which is there in your box out there..
regds
08-31-2006 04:23 AM
So,
IOS Image Name: 0-advsecurityk9-mz.124-6.T2.bin
Andris
08-31-2006 04:41 AM
hi Andris
As per the feature navigator the ios code which you are currently having in your box support URL web filtering.
Though i am not sure about SDM can you try configuring up the same using CLI ?
This link can help you out doing the same through CLI..
regds
08-31-2006 04:50 AM
Hi
This IOS supports firewall feature, but this will be done through external software called Websense...Are you having that software?
And the config can be done using following Link:
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080455b0e.html
Pls rate helpful posts.
Regards
JD
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: