Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco 871-K9 URL Filtering

Hello,

I'm have Cisco 871-K9

SDM version: 2.3

IOS version: 12.4(6)T2

In the URL Filtering section router says:

Application Firewall unavailable.

The IOS image in your router does not support the requested feature. To configure the feature, you need to go to the Software Center on Cisco.com and upgrade your IOS image to one that supports thyis feature set. URL Filtering

Any idea what to do.

Thank you in advance.

Andris

5 REPLIES

Re: Cisco 871-K9 URL Filtering

Hi

Can you give the IOS name?It should me advipservicesk9, but just making sure.....

Regards

JD

Re: Cisco 871-K9 URL Filtering

Hi Andris

Are you running your box with the following ios code c870-advipservicesk9-mz.12.4-6.T.bin ?

Do confirm the exact ios code name which is there in your box out there..

regds

New Member

Re: Cisco 871-K9 URL Filtering

So,

IOS Image Name: 0-advsecurityk9-mz.124-6.T2.bin

Andris

Re: Cisco 871-K9 URL Filtering

hi Andris

As per the feature navigator the ios code which you are currently having in your box support URL web filtering.

Though i am not sure about SDM can you try configuring up the same using CLI ?

This link can help you out doing the same through CLI..

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122limit/122y/122yu11/ftwebsen.htm

regds

Re: Cisco 871-K9 URL Filtering

Hi

This IOS supports firewall feature, but this will be done through external software called Websense...Are you having that software?

http://www.websense.com/

And the config can be done using following Link:

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080455b0e.html

Pls rate helpful posts.

Regards

JD

257
Views
0
Helpful
5
Replies
CreatePlease to create content