But a quick check on Google when I had an 871 that worked showed that the processor either ran at 166 or 266MHz. I can't remember which.
The ease way you MAY be able to find out is to do a sh ver. . .it'll tell you the processor in the router. You can plug that into a quick Google search and sometimes come up with a number, unless it's a processor specific to Cisco (which, not all are).
Thank you for your reply and the attached document which will help to determine about what could be the clock speed.
For you others who reads this message: Please be aware that the pps in the performance document is calculated based on cpu load 100% plus the pps is only unidirectional. I recommend a CPU load not higher than 70% and divide the pps with 2 to get bidirectional(duplex).
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.